Kunena 6.3.0 released

The Kunena team has announce the arrival of Kunena 6.3.0 [K 6.3.0] in stable which is now available for download as a native Joomla extension for J! 4.4.x/5.0.x/5.1.x. This version addresses most of the issues that were discovered in K 6.2 and issues discovered during the last development stages of K 6.3

This category is for K 1.7 issues only.
To get started please see K 1.6 & K 1.7 Installation Guide in our Documentation Wiki

Question Error in upgrading from k 1.5 to k1.7 (see attached screen shot)

More
12 years 7 months ago #11 by kross76
Replied by kross76 on topic Re: Error in upgrading from k 1.5 to k1.7 (see attached screen shot)
Well, never mind. I changed the parameter again (up to 2 minutes), and the installation seemed to go instantaneously. Problem seems to be solved.

Note - THANKS SO MUCH for your rapid support.

Please Log in or Create an account to join the conversation.

More
12 years 7 months ago #12 by Matias
Replied by Matias on topic Re: Error in upgrading from k 1.5 to k1.7 (see attached screen shot)
In which stage of installation this issue happens? When you're still in Joomla installer or inside Kunena installer? Can you send screen shot of the last page before the timeout?

Please Log in or Create an account to join the conversation.

More
12 years 7 months ago #13 by kross76
Replied by kross76 on topic Re: Error in upgrading from k 1.5 to k1.7 (see attached screen shot)
FYI, I supplied both screen shots in a prior thread.

Please Log in or Create an account to join the conversation.

More
12 years 7 months ago #14 by Matias
Replied by Matias on topic Re: Error in upgrading from k 1.5 to k1.7 (see attached screen shot)
Sorry, I misunderstood you. So what you get is this:

Installation runs just like it should and ends with success.
When you click on Finish, you will see this message?

Please Log in or Create an account to join the conversation.

More
12 years 7 months ago #15 by kross76
Replied by kross76 on topic Re: Error in upgrading from k 1.5 to k1.7 (see attached screen shot)
I'm a little confused with the thread sequences. Just to summarize, I increased the wait time to 120 seconds from 60 seconds, and the K 1.7 installation process completed rapidly and I assume successfully - I received no error messages, and the installation ended with the display of the Kunena configuration panel.

Please Log in or Create an account to join the conversation.

More
12 years 7 months ago #16 by Matias
Replied by Matias on topic Re: Error in upgrading from k 1.5 to k1.7 (see attached screen shot)
Ok, so the issue was fixed?

Please Log in or Create an account to join the conversation.

More
12 years 7 months ago #17 by kross76
Replied by kross76 on topic Re: Error in upgrading from k 1.5 to k1.7 (see attached screen shot)
Yes

Please Log in or Create an account to join the conversation.

Time to create page: 0.578 seconds