Kunena 7.0.9 & Kunena 6.4.14 – Security Updates Released

The Kunena team has announce the arrival of Kunena 7.0.9 [K 7.0.9] in stable which is now available for download as a native Joomla extension for J! 5.4.x/6.0.x./6.1.x. This version addresses most of the issues that were discovered in K 6.2 / K 6.3 / K 6.4 and issues discovered during the last development stages of K 7.0

Question unnessecary approve

More
2 weeks 4 days ago - 2 weeks 3 days ago #235229 by kboth
Replied by kboth on topic unnessecary approve
This message contains confidential information

Database collation check: The collation of your table fields are correct
       

Joomla! SEF: Enabled | Joomla! SEF rewrite: Disabled | FTP layer: Disabled |
       

This message contains confidential information
htaccess: Exists | PHP environment: Max execution time: 180 seconds | Max execution memory: 256M | Max file upload: 

Kunena menu details:

Warning: Spoiler!

Joomla default template details : cassiopeia | author: Joomla! Project | version: 1.0 | creationdate: 2017-02

Kunena default template details : Aurelia | author: Kunena Team | version: 7.0.8 | creationdate: 2026-08-05

Kunena template params:

Warning: Spoiler!

Kunena version detailed: Kunena 7.0.8 | 2026-08-05 [ Tarpezzo ]
        | Kunena detailed configuration:

Warning: Spoiler!
| Kunena integration settings:
Warning: Spoiler!
| Joomla! detailed language files installed:
Warning: Spoiler!

Third-party components: CommunityBuilder 2.12.0

Third-party SEF components: None

Plugins: None

Modules: Kunena Latest 6.0.2

Last edit: 2 weeks 3 days ago by rich. Reason: Email addresses removed from broken configuration
The topic has been locked.
More
2 weeks 4 days ago #235232 by Pinkeltje
Replied by Pinkeltje on topic unnessecary approve
Configuration looks good as far as I can see. Can you please check your category settings, maybe you've enabled moderation on category level? 
The topic has been locked.
More
2 weeks 3 days ago #235233 by kboth
Replied by kboth on topic unnessecary approve
Both Parameters are set to "NO" in my config.

(Back to the "Moderate New Users" you mentioned yesterday. This Parameter is/was set to "0" in my. config. As I understand this means no approve is necessary ?
My test yesterday was made from a test-account who never before entered a message. I made a second test yesterday with this user and NO approve was necessary - maybe because this was the second message of the User.... So the mystery remains. :-)
The topic has been locked.
More
2 weeks 3 days ago #235239 by rich
Replied by rich on topic unnessecary approve
0 means that no post needs to be approved. For example, if 1 is set, posts will be held until a moderator has approved at least one of them.
Check your categories; perhaps your problem doesn't occur in all of categories (see image).
If all settings are correct, try this: set the value to 1, then save; set the value back to 0 and save again. Maybe that will help.
.
 

Important! Always create a backup before you make any changes to your website!
The topic has been locked.
More
2 weeks 3 days ago #235240 by Gindi
Replied by Gindi on topic unnessecary approve
Have you had a look at the section Kunena Integration Settings: in the configuration report? Is that normal?
 
The following user(s) said Thank You: rich
The topic has been locked.
More
2 weeks 3 days ago - 2 weeks 3 days ago #235241 by rich
Replied by rich on topic unnessecary approve
Thanks @Gindi, I had only looking at the configuration. 

@kboth If the configuration report is unedited (as-is), you have an error in the database, specifically in the `kunena_configuration` table. The configuration appears four times in total, and three of those entries show `holdNewUsersPosts=` without a value.The entry should start with: `boardTitle=Kunena` Can you please check if this appears multiple times in the table?

Important! Always create a backup before you make any changes to your website!
Last edit: 2 weeks 3 days ago by rich.
The topic has been locked.
Time to create page: 0.289 seconds