Kunena 7.0.4 Released

The Kunena team has announce the arrival of Kunena 7.0.4 [K 7.0.4] in stable which is now available for download as a native Joomla extension for J! 5.4.x/6.0.x. This version addresses most of the issues that were discovered in K 6.2 / K 6.3 / K 6.4 and issues discovered during the last development stages of K 7.0

Themen, die in diesen Bereich verschoben wurden, gelten allgemein als beendet. Falls es dazu noch zusätzliche Fragen gibt, können diese zwar noch gestellt werden, aber diese alten Themen sollten auf keinen Fall wieder auferstehen, um neue Probleme zu erörtern.
Eröffnet dazu bitte ein eigenes neues Thema.

Question [gelöst] Artof User und Kunena 1.6.1

More
15 years 5 months ago #69550 by Case-Berlin
2.1 benutze ich, aber ich habe es gar nicht mehr versucht, weil es nie geklappt hat seit über einem Jahr.

Please Log in or Create an account to join the conversation.

More
15 years 5 months ago #69552 by haithun
Ich benutze immer noch 2.0 und habe das Problem damit nie gehabt.

Please Log in or Create an account to join the conversation.

More
15 years 5 months ago - 15 years 5 months ago #69717 by Mark0100

fxstein wrote: Ok - Hab das Problem gefunden.

ArtofUser ist ziemlich spaet dazu gekommen. Die Automatische Erkennung der ACL integrations funktioniert da leider nicht. Man muss sie manuell of JXtended setzen. Etwas das wir beheben muessen.


Wo mache ich diese Einstellung? Bei mir geht´s nämlich auch nicht.

In den FORUM EINSTELLUNGEN-INTEGRATION finde ich da nichts

edit: Ich sehe gerade, dass wenn ich auf KOMPONENTEN-ARTOFUSER klicke kommt das:

Fatal error: Allowed memory size of 67108864 bytes exhausted (tried to allocate 11705584 bytes) in /www/htdocs/xxxx/jo/libraries/phputf8/mbstring/case.php on line 30


eine Neuinstallation hat nichts gebracht

Art of User V 1.0.6


This message contains confidential information

Database collation check: The collation of your table fields are correct

Legacy mode: Disabled | Joomla! SEF: Enabled | Joomla! SEF rewrite: Enabled | FTP layer: Disabled |

This message contains confidential information
htaccess: Exists | PHP environment: Max execution time: 30 seconds | Max execution memory: 64M | Max file upload: 200M

This message contains confidential information

Kunena version detailled: Installed version: 1.6.1 | Build: 3858 | Version name: Timu | Kunena detailled configuration:

Warning: Spoiler!

Third-party components: AlphaUserPoints: Installed (Version : 1.5.11) | CommunityBuilder: Disabled or not installed | Jomsocial: Installed (Version : 1.8.11) | UddeIm: Disabled or not installed

Plugins: System - Mootools12: Disabled | System - Mootools Upgrade: Enabled | JFirePHP: Disabled or not installed | Kunena Discuss: Enabled (Version : 1.6.0-RC2) | Kunena Search: Disabled or not installed | My Kunena Forum Menu: Enabled (Version : 1.6.0-RC1) | My Kunena Forum Posts: Enabled (Version : 1.6.0-RC1)

Modules: Kunena Latest: Enabled (Version : 1.6.0-RC2) | Kunena Stats: Enabled (Version : 1.6.0-RC2) | Kunena Login: Disabled or not installed


Gruß Mark
Pickup-Wohnkabinen-Forum Kunena 4.0.7
Chevy-Forum Kunena 3.0.8
Last edit: 15 years 5 months ago by Mark0100.

Please Log in or Create an account to join the conversation.

More
15 years 5 months ago - 15 years 5 months ago #69719 by rich
Diese Fehlermeldung sagt aus, dass dein Memory Limit überschritten wird. Hast du irgendwelche speicherfressende Plugins laufen? Lies dazu bitte diesen Artikel: faq.wordpress-deutschland.org/exhausted-php-memory/

Important! Always create a backup before you make any changes to your website!
Last edit: 15 years 5 months ago by rich.
The following user(s) said Thank You: Mark0100

Please Log in or Create an account to join the conversation.

More
15 years 5 months ago #69721 by Case-Berlin
Hab auch ne Weile gesucht:


Aber dein Speicherleck musste wohl woanders suchen.
The following user(s) said Thank You: Mark0100

Please Log in or Create an account to join the conversation.

More
15 years 5 months ago #69732 by Mark0100
@rich ok, danke, da liegt das Problem, im Moment geht´s wieder

@Case-Berlin da hatte ich jetzt natürlich nicht geschaut. Ich hatte gedacht es wäre da ein eine extra Auswahl für Artof User.

Soweit hat es dann jetzt auch geklappt.

Aber: Jetzt habe ich ein weiteres Problem:

Die Gruppen einrichten, Foren und User zuweisen klappt einwandfrei.

Wenn ich jetzt aber einen User die Freigabe wieder entziehen will bleibt die Berechtigung trotzdem bestehen auch wenn ich ihn auf REGISTERED zurücksetze
Das Forum ist also weiter sicht- und einsehbar (schreiben geht auch)

Gruß Mark
Pickup-Wohnkabinen-Forum Kunena 4.0.7
Chevy-Forum Kunena 3.0.8

Please Log in or Create an account to join the conversation.

Time to create page: 0.269 seconds